Are you confused between choosing a laser marker or a dot peen marking machine? If so, read this guide and make the right choice for your manufacturing industry.
Introduction
Many manufacturing companies are now looking for permanent marking solutions for plastic and metal. Thus, many are confused about what to choose- laser markers or Dot Peen Marking Machines.
Both marking machines are required in the manufacturing industry since both have their importance and benefits. But if you need to choose one, then we have shared the difference between both the processes.
So without further ado, let us get started!
Difference Between Laser Marker and Dot Peen Marking Machine
Dot Peen Marking Machine is a handheld metal engraving machine that uses electricity to mark the metal. It uses pinned tip, which is made of rigid material like carbide, to mark the material. It leaves a small hole or patch after being punched, which affects both the roughness and the visual geometry.
In comparison to Dot Peen marking machine, the laser marking machine works with a more complex mechanism. It uses laser beam lights to mark the material’s surface with the help of two internal mirrors controlled by the computer.
Despite that, the dot peen marking machine is used for marking rigid materials such as metal, hard plastic, and steel. This laser technology is used in steel, aeronautics, and automotive industries. While on the other hand, laser marking machine is used for industries such as ceramics, wood, metal, and plastics. However, the major advantage of laser technology is parameters like indent pressure and wavelength that can be controlled by one who is operating this machine.
Types Of Markings You Can Do With Laser and Dot Peen
Dot Peen Markings machine is used to mark serial numbers, 2D barcodes, or deep marking on the material surface. In contrast, a laser marking machine is used to mark serial numbers and 2D barcodes with writing contrast.
Performance and Marking Cost
The best part of the dot peen marking machine is it is cheaper than other marking solutions. Thus, the investment in dot peen markers is profitable and cost-effective since you need to pay only for a small pin at the replacement time.
Laser markers are usually high in cost and come with greater flexibility of marking, which cost you a little higher. It can cost up to 5X more than a Dot peen marking machine, but it can be justified by looking into its major benefits, such as:
- Required low-maintenance
- No need for consumables
- Provide allowance for writing contrast
- Offers high speed
- One-time investment
Laser Marker Vs. Dot Peen Marking Machine- Which is better?
Dot Peen Marking machine technology has been in the market for many years. It is considered one of the best and most effective solutions, requires a low purchase cost, and offers a permanent marking solution. However, laser marking solution has now become popular in marking technology. It is best in cases like if you need a higher rate of performance that assures higher density and faster marking with a heavy amount of investment.
On the marketplace, you will find many brands selling manufacturing solutions for years, but Heat Sign is the best manufacturing solution for all industries. This offers cost-effective marking machines for each industry.
Final Verdict
So, above we have mentioned all the important aspects, you should consider when choosing between laser marking machine and dot peen marking machine. With the above discussion, we conclude that machines are effective and the best for investment. However, if you need a cheap and best solution, then the dot peen marking machine is a good option. But if you are ready for a one-time investment and ease your marking operations, then a laser marking machine can help you lifelong.
We have discussed all the crucial questions above and hope you know the solution to your question. Putting it simply, choose a marking solution based on your budget, speed, accuracy, and quality you need in your work.
